SMATRUL แผงสวิทช์ไฟเซนเซอร์แบบสัมผัส 1 2 3 Gang 120 Type1 Way Us 110V 220V
NOTE
*This switch does not require a neutral line it can be used directly after installation
1.Dont lid on the glass panel when the switch is in electrical.The glass panel was lid on when it is in electrical. then the switch will not work
please Restart the main electric switch in your home. it will work
2. Solutions to the problem of insensitive touch
Problem: The switch base is screwed too deeply and tightly causing a gap between the backlight board and the panel.
Solution: Dont screw the lock screw too deep if you cant reach it you can replace it with a longer screw; or fill something between the switch and the bottom box. For touch-sensitive situations as long as you pay a little attention during installation it usually rarely happens.
Reminder:
1.This wall switch does not have 433MHZ. Can not be paired with the wireless switch panel.
2. The switching power is 3~300W. If the power of the bulb more than 300W please do not use this switch. If the power of the bulb is less than 3W please be sure to install a capacitor otherwise it will not work properly.
Our advantage:
*With red and blue LED indicators it will not be dazzling in the dark and will not be very bright (bring you a very comfortable feeling) red on blue off
*Single live wire control easy to install directly replace the old switch
*Toughened glass to prevent scratches on knives or hard objects.
*Applicable to: incandescent bulbs fluorescent lamps energy-saving lamps LED lamps (power lamps above 3W)
* Tempered glass easy to clean. Does not fade looks like new
*Can be touched with wet hands
*Fireproof strengthen the protection against short circuit of power cord
*Protection against overcurrent and anti-interference.
*After the power is turned off the switch remains off
Product parameter
Shell material:PC flame retardant material
Panel material:Tempered glass
Installation hole distance:86mm
Rated voltage:90-250V50-60Hz
Start method:Touch
Load power;3-300W/gang
(4.7)
(4.22)
(3.79)